There has been daily progress on the Strip Canoe. The outside of the canoe is just about finished and it’s nearly time to remove it from the strongback frame so that work can continue on the inside.
After all the strips were glued into place and the excess glue scraped from the outside of the canoe, it was time to sand. Because this project is taking place in my basement, Mr. Hobby put up some plastic to contain as much of the sanding dust as possible. The canoe was sanded with a random orbital sander.
After the sanding, Mr. Hobby applied a sealer coat of epoxy.
Once the sealer coat dried, the canoe was draped with a sheet of fiberglass. Mr. Hobby mixed up a different batch of epoxy that was specifically made for this type of application. This was rolled and then spread with a plastic squeegee blade. This first coat of epoxy needed to fill in the weave of the fiberglass.
The fiberglass sheet was trimmed with a pair of household scissors. After the epoxy dried, Mr. Hobby scrapped off any high spots. Two more coats of this same epoxy were applied and allowed to dry.
There is still more finish work to be done on the outside, but that will wait until the work on the inside of the canoe is done.
Thank you!
A bird bath is the underrated bird-attracting tool — birds need water more reliably than they need feeders, especially in hot summers. The right bath has the correct depth (shallow!), is easy to clean, and survives a w
Squirrels eat through standard bird feeders in days — chew the plastic, raid the seed, intimidate the birds. A genuinely squirrel-proof feeder uses one of three mechanisms: weight-activated closure, baffled pole, or ca
A backyard bird feeder is one of the easiest ways to add daily wonder to a garden — within weeks of setting one up you start recognising the regulars, and within a month the kids know their wattlebirds from their honey
String trimmer line is the cheapest consumable in your gardening kit — but the cheapest line snaps every five minutes, jams the auto-feed, and turns a 30-minute edge job into an hour. The right line for your trimmer ma
Lawn stripes — those alternating light/dark bands you see on professional sports fields — are produced by bending grass blades in opposite directions as you mow. A striping kit attaches a roller behind your mower to
A lawn sweeper picks up leaves, grass clippings, twigs and pine needles in a fraction of the time of raking. Tow behind a ride-on mower or push by hand — they save serious time on autumn cleanup. The right sweeper has
